upload
Schlumberger Limited
Industri: Oil & gas
Number of terms: 8814
Number of blossaries: 0
Company Profile:
A generic term used to describe a treatment fluid typically comprising hydrochloric acid and a blend of acid additives. Acid treatments are commonly designed to include a range of acid types or blends, such as acetic, formic, hydrochloric, hydrofluoric and fluroboric acids. Applications for the various acid types or blends are based on the reaction characteristics of the prepared treatment fluid.
Industry:Oil & gas
A generic term referring to all possible routes for annular gas entry and propagation through and around the cement sheath. Gas migration is also known as annular gas flow.
Industry:Oil & gas
A generic term pertaining to any type of oilfield pipe, such as drill pipe, drill collars, pup joints, casing, production tubing and pipeline.
Industry:Oil & gas
A generic term for soft, sticky, swelling clay formations that are frequently encountered in surface holes offshore or in sedimentary basins onshore near seas. This clay fouls drilling tools and plugs piping, both severe problems for drilling crews.
Industry:Oil & gas
A generic term for several classes of self-contained floatable or floating drilling machines such as jackups, semisubmersibles, and submersibles.
Industry:Oil & gas
A generic name widely used for a black, lustrous, carbonaceous resin classified as an asphaltite. Its proper name is uintaite, and it is found in Utah, USA. An important characteristic of gilsonite is its softening-point temperature. In oil-base muds, it is used as a fluid-loss control agent. Being a hydrocarbon, it is naturally wetted by the oil. In water-base muds, it is used as a shale-stabilizing additive and is difficult to evaluate unless tested at or above its softening point. As a hydrocarbon, the powder must be coupled to water by using a glycol or similar water-wetter.
Industry:Oil & gas
A generic name for low molecular weight, water-soluble polymers and oligomers containing a large number of hydroxyl groups. Specific examples include glycols, polyglycols and polyglycerols. Polyols are used in water-base fluids as shale inhibitors and gas hydrate inhibitors.
Industry:Oil & gas
A general term for those gases that are acidic either alone or when associated with water. Two sour gases associated with oil and gas drilling and production are hydrogen sulfide, H<sub>2</sub>S, and carbon dioxide, CO<sub>2</sub>. Sulfur oxides and nitrogen oxides, generated by oxidation of certain sulfur- or nitrogen-bearing materials, are also in this category but not found in the anaerobic conditions of the subsurface.
Industry:Oil & gas
A general term for special mechanical devices used to aid the recovery of equipment lost downhole. These devices generally fall into four classes: diagnostic, inside grappling, outside grappling, and force intensifiers or jars. Diagnostic devices may range from a simple impression block made in a soft metal, usually lead, that is dropped rapidly onto the top of the fish so that upon inspection at the surface, the fisherman may be able to custom design a tool to facilitate attachment to and removal of the fish. Other diagnostic tools may include electronic instruments and even downhole sonic or visual-bandwidth cameras. Inside grappling devices, usually called spears, generally have a tapered and threaded profile, enabling the fisherman to first guide the tool into the top of the fish, and then thread the fishing tool into the top of the fish so that recovery may be attempted. Outside grappling devices, usually called overshots, are fitted with threads or another shape that "swallows" the fish and does not release it as it is pulled out of the hole. Overshots are also fitted with a crude drilling surface at the bottom, so that the overshot may be lightly drilled over the fish, sometimes to remove rock or metallic junk that may be part of the sticking mechanism. Jars are mechanical downhole hammers, which enable the fisherman to deliver high-impact loads to the fish, far in excess of what could be applied in a quasi-static pull from the surface.
Industry:Oil & gas
A full-sized length of casing placed at the bottom of the casing string that is usually left full of cement on the inside to ensure that good cement remains on the outside of the bottom of the casing. If cement were not left inside the casing in this manner, the risk of overdisplacing the cement (due to improper casing volume calculations, displacement mud volume measurements, or both) would be significantly higher. Hence, the well designer plans on a safety margin of cement left inside the casing to guarantee that the fluid left outside the casing is good-quality cement. A float collar is placed at the top of the float joint and a float shoe placed at the bottom to prevent reverse flow of cement back into the casing after placement. There can be one, two or three joints of casing used for this purpose.
Industry:Oil & gas